sora/epfl-archive
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Disabled external gits

Browse Source
This commit is contained in:
choelzl
2022-04-07 18:54:11 +02:00
parent 15e7120d6d
commit 0fb3e365d4
376 changed files with 50840 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

187
cs309-psoc/lab_1_1/hw/hdl/DE0_Nano_SoC_PrSoC_extn_board_top_level.vhd Normal file
View File

@@ -0,0 +1,187 @@
-- #############################################################################
-- DE0_Nano_SoC_PrSoC_extn_board_top_level.vhd
--
-- BOARD : PrSoC extension board for DE0-Nano-SoC
-- Author : Florian Depraz based on Sahand Kashani-Akhavan work
-- Revision : 1.1
-- Creation date : 06/02/2016
--
-- Syntax Rule : GROUP_NAME_N[bit]
--
-- GROUP : specify a particular interface (ex: SDR_)
-- NAME : signal name (ex: CONFIG, D, ...)
-- bit : signal index
-- _N : to specify an active-low signal
-- #############################################################################
library ieee;
use ieee.std_logic_1164.all;
entity DE0_Nano_SoC_PrSoC_extn_board_top_level is
port(
-------------------------------
-- Comment ALL unused ports. --
-------------------------------
-- CLOCK
FPGA_CLK1_50 : in std_logic;
-- FPGA_CLK2_50 : in std_logic;
-- FPGA_CLK3_50 : in std_logic;
-- KEY on DE0 Nano SoC
KEY_N : in std_logic_vector(1 downto 0);
-- LEDs on DE0 Nano SoC
-- LED : out std_logic_vector(7 downto 0);
-- SWITCHES on DE0 Nano SoC
-- SW : in std_logic_vector(3 downto 0);
-- Servomotors pwm
SERVO_0 : out std_logic;
SERVO_1 : out std_logic
-- ADC Joysticks
-- J0_SPI_CS_n : out std_logic;
-- J0_SPI_MOSI : out std_logic;
-- J0_SPI_MISO : in std_logic;
-- J0_SPI_CLK : out std_logic;
-- Lepton
-- CAM_TH_SPI_CS_N : out std_logic;
-- CAM_TH_MISO : in std_logic;
-- CAM_TH_MOSI : out std_logic;
-- CAM_TH_CLK : out std_logic;
-- PCA9637
-- PIO_SCL : inout std_logic;
-- PIO_SDA : inout std_logic;
-- PIO_INT_N : in std_logic;
-- RESET_N : out std_logic;
-- OV7670
-- CAM_D : in std_logic_vector(9 downto 0);
-- CAM_PIX_CLK : in std_logic;
-- CAM_LV : in std_logic;
-- CAM_FV : in std_logic;
-- CAM_SYS_CLK : out std_logic;
-- VGA and LCD shared signals
-- VIDEO_CLK : out std_logic;
-- VIDEO_VSYNC : out std_logic;
-- VIDEO_HSYNC : out std_logic;
-- VIDEO_B : out std_logic_vector(7 downto 0);
-- VIDEO_G : out std_logic_vector(7 downto 0);
-- VIDEO_R : out std_logic_vector(7 downto 0);
-- LCD Specific signals
-- LCD_DE : out std_logic;
-- LCD_PIN_DAV_N : ? ?? std_logic;
-- LCD_DISPLAY_EN : out std_logic;
-- SPI_MISO : in std_logic;
-- SPI_ENA_N : out std_logic;
-- SPI_CLK : out std_logic;
-- SPI_MOSI : out std_logic;
-- SPI_DAT : inout std_logic;
-- I2C TOUCH SCREEN
-- TS_SCL : inout std_logic;
-- TS_SDA : inout std_logic;
-- BLUETOOTH (BLE)
-- BLT_TXD : in std_logic;
-- BLT_RXD : out std_logic;
-- I2C For VGA, PAL and OV7670 cameras
-- CAM_PAL_VGA_SDA : inout std_logic;
-- CAM_PAL_VGA_SCL : inout std_logic;
-- ONE WIRE
-- BOARD_ID : inout std_logic;
-- PAL Camera
-- PAL_VD_VD : in std_logic_vector(7 downto 0);
-- PAL_VD_VSO : in std_logic;
-- PAL_VD_HSO : in std_logic;
-- PAL_VD_CLKO : in std_logic;
-- PAL_PWDN : out std_logic;
-- WIFI
-- FROM_ESP_TXD : in std_logic;
-- TO_ESP_RXD : out std_logic;
-- LED RGB
-- LED_BGR : out std_logic;
-- HPS
-- HPS_CONV_USB_N : inout std_logic;
-- HPS_DDR3_ADDR : out std_logic_vector(14 downto 0);
-- HPS_DDR3_BA : out std_logic_vector(2 downto 0);
-- HPS_DDR3_CAS_N : out std_logic;
-- HPS_DDR3_CK_N : out std_logic;
-- HPS_DDR3_CK_P : out std_logic;
-- HPS_DDR3_CKE : out std_logic;
-- HPS_DDR3_CS_N : out std_logic;
-- HPS_DDR3_DM : out std_logic_vector(3 downto 0);
-- HPS_DDR3_DQ : inout std_logic_vector(31 downto 0);
-- HPS_DDR3_DQS_N : inout std_logic_vector(3 downto 0);
-- HPS_DDR3_DQS_P : inout std_logic_vector(3 downto 0);
-- HPS_DDR3_ODT : out std_logic;
-- HPS_DDR3_RAS_N : out std_logic;
-- HPS_DDR3_RESET_N : out std_logic;
-- HPS_DDR3_RZQ : in std_logic;
-- HPS_DDR3_WE_N : out std_logic;
-- HPS_ENET_GTX_CLK : out std_logic;
-- HPS_ENET_INT_N : inout std_logic;
-- HPS_ENET_MDC : out std_logic;
-- HPS_ENET_MDIO : inout std_logic;
-- HPS_ENET_RX_CLK : in std_logic;
-- HPS_ENET_RX_DATA : in std_logic_vector(3 downto 0);
-- HPS_ENET_RX_DV : in std_logic;
-- HPS_ENET_TX_DATA : out std_logic_vector(3 downto 0);
-- HPS_ENET_TX_EN : out std_logic;
-- HPS_GSENSOR_INT : inout std_logic;
-- HPS_I2C0_SCLK : inout std_logic;
-- HPS_I2C0_SDAT : inout std_logic;
-- HPS_I2C1_SCLK : inout std_logic;
-- HPS_I2C1_SDAT : inout std_logic;
-- HPS_KEY_N : inout std_logic;
-- HPS_LED : inout std_logic;
-- HPS_LTC_GPIO : inout std_logic;
-- HPS_SD_CLK : out std_logic;
-- HPS_SD_CMD : inout std_logic;
-- HPS_SD_DATA : inout std_logic_vector(3 downto 0);
-- HPS_SPIM_CLK : out std_logic;
-- HPS_SPIM_MISO : in std_logic;
-- HPS_SPIM_MOSI : out std_logic;
-- HPS_SPIM_SS : inout std_logic;
-- HPS_UART_RX : in std_logic;
-- HPS_UART_TX : out std_logic;
-- HPS_USB_CLKOUT : in std_logic;
-- HPS_USB_DATA : inout std_logic_vector(7 downto 0);
-- HPS_USB_DIR : in std_logic;
-- HPS_USB_NXT : in std_logic;
-- HPS_USB_STP : out std_logic
);
end entity DE0_Nano_SoC_PrSoC_extn_board_top_level;
architecture rtl of DE0_Nano_SoC_PrSoC_extn_board_top_level is
component soc_system is
port (
clk_clk : in std_logic := 'X';
reset_reset_n : in std_logic := 'X';
pwm_0_conduit_end_pwm : out std_logic;
pwm_1_conduit_end_pwm : out std_logic
);
end component soc_system;
begin
soc_system_inst : component soc_system
port map (
clk_clk => FPGA_CLK1_50,
reset_reset_n => KEY_N(0),
pwm_0_conduit_end_pwm => SERVO_0,
pwm_1_conduit_end_pwm => SERVO_1
);
end;

134
cs309-psoc/lab_1_1/hw/hdl/pantilt/hdl/pwm.vhd Normal file
View File

@@ -0,0 +1,134 @@
-- #############################################################################
-- pwm.vhd
-- =======
-- PWM memory-mapped Avalon slave interface.
--
-- Author : Cedric Hoelzl (cedric.hoelzl@epfl.ch)
-- Author : Antoine Brunner (antoine.brunner@epfl.ch)
-- Revision : 0.0.1a_rc1
-- Last modified : a few billion clock cycles in the past
-- #############################################################################
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use work.pwm_constants.all;
entity pwm is
port(
-- Avalon Clock interface
clk : in std_logic;
-- Avalon Reset interface
reset : in std_logic;
-- Avalon-MM Slave interface
address : in std_logic_vector(1 downto 0);
read : in std_logic;
write : in std_logic;
readdata : out std_logic_vector(31 downto 0);
writedata : in std_logic_vector(31 downto 0);
-- Avalon Conduit interface
pwm_out : out std_logic
);
end pwm;
architecture rtl of pwm is
-- The period of the current and next PWM cycle
signal reg_next_period : unsigned(writedata'range) := to_unsigned(DEFAULT_PERIOD, writedata'length);
signal reg_current_period : unsigned(writedata'range) := to_unsigned(DEFAULT_PERIOD, writedata'length);
-- The duty cycle of the current and next PWM cycle
signal reg_next_dutycycle : unsigned(writedata'range) := to_unsigned(DEFAULT_DUTY_CYCLE, writedata'length);
signal reg_current_dutycycle : unsigned(writedata'range) := to_unsigned(DEFAULT_DUTY_CYCLE, writedata'length);
-- The status of the current and next PWM cycle
signal reg_prev_ctrl : std_logic := '0';
signal reg_current_ctrl : std_logic := '0';
-- The internal counter of the PWN
signal reg_counter : unsigned(writedata'range) := to_unsigned(0, writedata'length);
begin
--Avalon-MM slave write
process(clk, reset)
begin
if reset = '1' then
reg_next_period <= to_unsigned(DEFAULT_PERIOD, writedata'length);
reg_next_dutycycle <= to_unsigned(DEFAULT_DUTY_CYCLE, writedata'length);
reg_current_ctrl <= '0';
elsif rising_edge(clk) then
if write = '1' then
case address is
when REG_PERIOD_OFST =>
if unsigned(writedata) >= to_unsigned(2, writedata'length) then
reg_next_period <= unsigned(writedata);
end if;
when REG_DUTY_CYCLE_OFST =>
if (unsigned(writedata) >= to_unsigned(1, writedata'length)) and
(unsigned(writedata) <= reg_next_period) then
reg_next_dutycycle <= unsigned(writedata);
end if;
when REG_CTRL_OFST =>
reg_current_ctrl <= writedata(0);
when others => null;
end case;
end if;
end if;
end process;
--Avalon-MM slave read
process(clk, reset)
begin
if rising_edge(clk) then
if read = '1' then
case address is
when REG_PERIOD_OFST =>
readdata <= std_logic_vector(reg_current_period);
when REG_DUTY_CYCLE_OFST =>
readdata <= std_logic_vector(reg_current_dutycycle);
when others =>
readdata <= (others => '0');
end case;
end if;
end if;
end process;
-- Internal synchronous logic
process(clk, reset)
begin
if reset = '1' then
reg_counter <= to_unsigned(0, writedata'length);
reg_prev_ctrl <= '0';
elsif rising_edge(clk) then
if ((reg_prev_ctrl = '0') and (reg_current_ctrl = '1')) or
(reg_counter = reg_current_period - 1) then
reg_current_period <= reg_next_period;
reg_current_dutycycle <= reg_next_dutycycle;
reg_counter <= to_unsigned(0, writedata'length);
elsif (reg_current_ctrl = '1') then
reg_counter <= reg_counter + 1;
end if;
reg_prev_ctrl <= reg_current_ctrl;
end if;
end process;
-- Avalon Conduit interface
process(clk, reset)
begin
if rising_edge(clk) then
if (reg_counter < reg_current_dutycycle) and (reg_current_ctrl = '1') then
pwm_out <= '1';
else
pwm_out <= '0';
end if;
end if;
end process;
end architecture rtl;

61
cs309-psoc/lab_1_1/hw/hdl/pantilt/hdl/pwm_constants.vhd Normal file
View File

@@ -0,0 +1,61 @@
-- #############################################################################
-- pwm_constants.vhd
-- =================
-- This package contains constants used in the PWM design files.
--
-- Author : Sahand Kashani-Akhavan [sahand.kashani-akhavan@epfl.ch]
-- Revision : 2
-- Last modified : 2018-02-28
-- #############################################################################
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
package pwm_constants is
-- Register map
-- +--------+------------+--------+------------------------------------------------------------------------------+
-- | RegNo | Name | Access | Description |
-- +--------+------------+--------+------------------------------------------------------------------------------+
-- | 0 | PERIOD | R/W | Period in clock cycles [2 <= period <= (2**32) - 1]. |
-- | | | | |
-- | | | | This value can be read/written while the unit is in the middle of an ongoing |
-- | | | | PWM pulse. To allow safe behaviour, one cannot modify the period of an |
-- | | | | ongoing pulse, so we adopt the following semantics for this register: |
-- | | | | |
-- | | | | >> WRITING a value in this register indicates the NEW period to apply to the |
-- | | | | next pulse. |
-- | | | | |
-- | | | | >> READING a value from this register indicates the CURRENT period of the |
-- | | | | ongoing pulse. |
-- +--------+------------+--------+------------------------------------------------------------------------------+
-- | 1 | DUTY_CYCLE | R/W | Duty cycle of the PWM [1 <= duty cycle <= period] |
-- | | | | |
-- | | | | This value can be read/written while the unit is in the middle of an ongoing |
-- | | | | PWM pulse. To allow safe behaviour, one cannot modify the duty cycle of an |
-- | | | | ongoing pulse, so we adopt the following semantics for this register: |
-- | | | | |
-- | | | | >> WRITING a value in this register indicates the NEW duty cycle to apply to |
-- | | | | the next pulse. |
-- | | | | |
-- | | | | >> READING a value from this register indicates the CURRENT duty cycle of |
-- | | | | the ongoing pulse. |
-- +--------+------------+--------+------------------------------------------------------------------------------+
-- | 2 | CTRL | WO | >> Writing 0 to this register stops the PWM once the ongoing pulse has ended.|
-- | | | | Writing 1 to this register starts the PWM. |
-- | | | | |
-- | | | | >> Reading this register always returns 0. |
-- +--------+------------+--------+------------------------------------------------------------------------------+
constant REG_PERIOD_OFST : std_logic_vector(1 downto 0) := "00";
constant REG_DUTY_CYCLE_OFST : std_logic_vector(1 downto 0) := "01";
constant REG_CTRL_OFST : std_logic_vector(1 downto 0) := "10";
-- Default values of registers after reset (BEFORE writing START to the CTRL
-- register with a new configuration)
constant DEFAULT_PERIOD : natural := 4;
constant DEFAULT_DUTY_CYCLE : natural := 2;
end package pwm_constants;
package body pwm_constants is
end package body pwm_constants;

135
cs309-psoc/lab_1_1/hw/hdl/pantilt/hdl/pwm_hw.tcl Normal file
View File

@@ -0,0 +1,135 @@
# TCL File Generated by Component Editor 16.0
# Tue Feb 28 12:18:00 CET 2017
# DO NOT MODIFY
#
# pwm "pwm" v1.0
# 2017.02.28.12:18:00
# Pan-tilt
#
#
# request TCL package from ACDS 16.0
#
package require -exact qsys 16.0
#
# module pwm
#
set_module_property DESCRIPTION Pan-tilt
set_module_property NAME pwm
set_module_property VERSION 1.0
set_module_property INTERNAL false
set_module_property OPAQUE_ADDRESS_MAP true
set_module_property GROUP Pan-tilt
set_module_property AUTHOR ""
set_module_property DISPLAY_NAME pwm
set_module_property INSTANTIATE_IN_SYSTEM_MODULE true
set_module_property EDITABLE true
set_module_property REPORT_TO_TALKBACK false
set_module_property ALLOW_GREYBOX_GENERATION false
set_module_property REPORT_HIERARCHY false
#
# file sets
#
add_fileset QUARTUS_SYNTH QUARTUS_SYNTH "" ""
set_fileset_property QUARTUS_SYNTH TOP_LEVEL pwm
set_fileset_property QUARTUS_SYNTH ENABLE_RELATIVE_INCLUDE_PATHS false
set_fileset_property QUARTUS_SYNTH ENABLE_FILE_OVERWRITE_MODE false
add_fileset_file pwm.vhd VHDL PATH pwm.vhd TOP_LEVEL_FILE
add_fileset_file pwm_constants.vhd VHDL PATH pwm_constants.vhd
#
# parameters
#
#
# display items
#
#
# connection point clock
#
add_interface clock clock end
set_interface_property clock clockRate 0
set_interface_property clock ENABLED true
set_interface_property clock EXPORT_OF ""
set_interface_property clock PORT_NAME_MAP ""
set_interface_property clock CMSIS_SVD_VARIABLES ""
set_interface_property clock SVD_ADDRESS_GROUP ""
add_interface_port clock clk clk Input 1
#
# connection point reset
#
add_interface reset reset end
set_interface_property reset associatedClock clock
set_interface_property reset synchronousEdges DEASSERT
set_interface_property reset ENABLED true
set_interface_property reset EXPORT_OF ""
set_interface_property reset PORT_NAME_MAP ""
set_interface_property reset CMSIS_SVD_VARIABLES ""
set_interface_property reset SVD_ADDRESS_GROUP ""
add_interface_port reset reset reset Input 1
#
# connection point avalon_slave_0
#
add_interface avalon_slave_0 avalon end
set_interface_property avalon_slave_0 addressUnits WORDS
set_interface_property avalon_slave_0 associatedClock clock
set_interface_property avalon_slave_0 associatedReset reset
set_interface_property avalon_slave_0 bitsPerSymbol 8
set_interface_property avalon_slave_0 burstOnBurstBoundariesOnly false
set_interface_property avalon_slave_0 burstcountUnits WORDS
set_interface_property avalon_slave_0 explicitAddressSpan 0
set_interface_property avalon_slave_0 holdTime 0
set_interface_property avalon_slave_0 linewrapBursts false
set_interface_property avalon_slave_0 maximumPendingReadTransactions 0
set_interface_property avalon_slave_0 maximumPendingWriteTransactions 0
set_interface_property avalon_slave_0 readLatency 0
set_interface_property avalon_slave_0 readWaitTime 1
set_interface_property avalon_slave_0 setupTime 0
set_interface_property avalon_slave_0 timingUnits Cycles
set_interface_property avalon_slave_0 writeWaitTime 0
set_interface_property avalon_slave_0 ENABLED true
set_interface_property avalon_slave_0 EXPORT_OF ""
set_interface_property avalon_slave_0 PORT_NAME_MAP ""
set_interface_property avalon_slave_0 CMSIS_SVD_VARIABLES ""
set_interface_property avalon_slave_0 SVD_ADDRESS_GROUP ""
add_interface_port avalon_slave_0 address address Input 2
add_interface_port avalon_slave_0 read read Input 1
add_interface_port avalon_slave_0 write write Input 1
add_interface_port avalon_slave_0 readdata readdata Output 32
add_interface_port avalon_slave_0 writedata writedata Input 32
set_interface_assignment avalon_slave_0 embeddedsw.configuration.isFlash 0
set_interface_assignment avalon_slave_0 embeddedsw.configuration.isMemoryDevice 0
set_interface_assignment avalon_slave_0 embeddedsw.configuration.isNonVolatileStorage 0
set_interface_assignment avalon_slave_0 embeddedsw.configuration.isPrintableDevice 0
#
# connection point conduit_end
#
add_interface conduit_end conduit end
set_interface_property conduit_end associatedClock clock
set_interface_property conduit_end associatedReset ""
set_interface_property conduit_end ENABLED true
set_interface_property conduit_end EXPORT_OF ""
set_interface_property conduit_end PORT_NAME_MAP ""
set_interface_property conduit_end CMSIS_SVD_VARIABLES ""
set_interface_property conduit_end SVD_ADDRESS_GROUP ""
add_interface_port conduit_end pwm_out pwm Output 1

205
cs309-psoc/lab_1_1/hw/hdl/pantilt/tb/tb_pwm.vhd Normal file
View File

@@ -0,0 +1,205 @@
-- #############################################################################
-- tb_pwm.vhd
-- ==========
-- Testbench for PWM memory-mapped Avalon slave interface.
--
-- Modified by : Sahand Kashani-Akhavan [sahand.kashani-akhavan@epfl.ch]
-- Revision : 2
-- Last modified : 2018-02-28
-- #############################################################################
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use work.pwm_constants.all;
entity tb_pwm is
end entity;
architecture rtl of tb_pwm is
-- 50 MHz clock
constant CLK_PERIOD : time := 20 ns;
-- Signal used to end simulator when we finished submitting our test cases
signal sim_finished : boolean := false;
-- PWM PORTS
signal clk : std_logic;
signal reset : std_logic;
signal address : std_logic_vector(1 downto 0);
signal read : std_logic;
signal write : std_logic;
signal readdata : std_logic_vector(31 downto 0);
signal writedata : std_logic_vector(31 downto 0);
signal pwm_out : std_logic;
-- Values of registers we are going to use to configure the PWM unit
constant CONFIG_PERIOD : natural := 100;
constant CONFIG_DUTY_CYCLE : natural := 20;
constant CONFIG_CTRL_START : natural := 1;
constant CONFIG_CTRL_STOP : natural := 0;
begin
-- Instantiate DUT
dut : entity work.pwm
port map(
clk => clk,
reset => reset,
address => address,
read => read,
write => write,
readdata => readdata,
writedata => writedata,
pwm_out => pwm_out
);
-- Generate clk signal
clk_generation : process
begin
if not sim_finished then
clk <= '1';
wait for CLK_PERIOD / 2;
clk <= '0';
wait for CLK_PERIOD / 2;
else
wait;
end if;
end process clk_generation;
-- Test PWM
simulation : process
procedure async_reset is
begin
wait until rising_edge(clk);
wait for CLK_PERIOD / 4;
reset <= '1';
wait for CLK_PERIOD / 2;
reset <= '0';
wait for CLK_PERIOD / 4;
end procedure async_reset;
procedure write_register(constant ofst : in std_logic_vector(1 downto 0);
constant val : in natural) is
begin
wait until rising_edge(clk);
address <= ofst;
write <= '1';
writedata <= std_logic_vector(to_unsigned(val, writedata'length));
wait until rising_edge(clk);
address <= (others => '0');
write <= '0';
writedata <= (others => '0');
wait until rising_edge(clk);
end procedure write_register;
procedure read_register(constant ofst : in std_logic_vector(1 downto 0)) is
begin
wait until rising_edge(clk);
address <= ofst;
read <= '1';
-- The read has a 1 cycle wait-state, so we need to keep the read
-- signal high for 2 clock cycles.
wait until rising_edge(clk);
wait until rising_edge(clk);
address <= (others => '0');
read <= '0';
wait until rising_edge(clk);
end procedure read_register;
procedure read_register_check(constant ofst : in std_logic_vector(1 downto 0);
constant expected_val : in natural) is
begin
read_register(ofst);
case ofst is
when REG_PERIOD_OFST =>
assert to_integer(unsigned(readdata)) = expected_val
report "Unexpected PERIOD: " &
"PERIOD = " & integer'image(to_integer(unsigned(readdata))) & "; " &
"PERIOD_expected = " & integer'image(expected_val)
severity error;
when REG_DUTY_CYCLE_OFST =>
assert to_integer(unsigned(readdata)) = expected_val
report "Unexpected DUTY_CYCLE: " &
"DUTY_CYCLE = " & integer'image(to_integer(unsigned(readdata))) & "; " &
"DUTY_CYCLE_expected = " & integer'image(expected_val)
severity error;
when REG_CTRL_OFST =>
assert to_integer(unsigned(readdata)) = expected_val
report "Unexpected CTRL: " &
"CTRL = " & integer'image(to_integer(unsigned(readdata))) & "; " &
"CTRL_expected = " & integer'image(expected_val)
severity error;
when others =>
null;
end case;
end procedure read_register_check;
begin
-- Default values
reset <= '0';
address <= (others => '0');
read <= '0';
write <= '0';
writedata <= (others => '0');
wait until rising_edge(clk);
-- Reset the circuit
async_reset;
-- Write desired configuration to PWM Avalon-MM slave.
write_register(REG_PERIOD_OFST, CONFIG_PERIOD);
write_register(REG_DUTY_CYCLE_OFST, CONFIG_DUTY_CYCLE);
-- Read back configuration from PWM Avalon-MM slave. Note that we have
-- not started the PWM unit yet, so the new configuration must not be
-- read back at this point (as per the register map).
read_register_check(REG_PERIOD_OFST, DEFAULT_PERIOD);
read_register_check(REG_DUTY_CYCLE_OFST, DEFAULT_DUTY_CYCLE);
read_register_check(REG_CTRL_OFST, 0);
-- Start PWM
write_register(REG_CTRL_OFST, CONFIG_CTRL_START);
-- Wait until PWM pulses for the first time after we sent START.
wait until rising_edge(pwm_out);
-- Read back configuration from PWM Avalon-MM slave. Now that we have
-- started the PWM unit, we should be able to read back the
-- configuration we wrote (as per the register map).
read_register_check(REG_PERIOD_OFST, CONFIG_PERIOD);
read_register_check(REG_DUTY_CYCLE_OFST, CONFIG_DUTY_CYCLE);
read_register_check(REG_CTRL_OFST, 0);
-- Wait for 2 PWM periods to finish
wait for 2 * CLK_PERIOD * CONFIG_PERIOD;
-- Stop PWM.
write_register(REG_CTRL_OFST, CONFIG_CTRL_STOP);
-- Wait for PWM period to finish
wait for 1 * CLK_PERIOD * CONFIG_PERIOD;
-- Instruct "clk_generation" process to halt execution.
sim_finished <= true;
-- Make this process wait indefinitely (it will never re-execute from
-- its beginning again).
wait;
end process simulation;
end architecture rtl;