815 lines
30 KiB
Plaintext
815 lines
30 KiB
Plaintext
|
--altsyncram ADDRESS_ACLR_A="NONE" CBX_DECLARE_ALL_CONNECTED_PORTS="OFF" CYCLONEII_M4K_COMPATIBILITY="ON" DEVICE_FAMILY="Cyclone IV E" INDATA_ACLR_A="NONE" INIT_FILE="db/GECKO.ram0_RAM_15119.hdl.mif" LOW_POWER_MODE="AUTO" NUMWORDS_A=1024 OPERATION_MODE="SINGLE_PORT" OUTDATA_ACLR_A="NONE" OUTDATA_REG_A="UNREGISTERED" WIDTH_A=32 WIDTHAD_A=10 WRCONTROL_ACLR_A="NONE" address_a clock0 data_a q_a wren_a CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48
|
||
|
--VERSION_BEGIN 18.0 cbx_altera_syncram_nd_impl 2018:04:24:18:04:18:SJ cbx_altsyncram 2018:04:24:18:04:18:SJ cbx_cycloneii 2018:04:24:18:04:18:SJ cbx_lpm_add_sub 2018:04:24:18:04:18:SJ cbx_lpm_compare 2018:04:24:18:04:18:SJ cbx_lpm_decode 2018:04:24:18:04:18:SJ cbx_lpm_mux 2018:04:24:18:04:18:SJ cbx_mgl 2018:04:24:18:08:49:SJ cbx_nadder 2018:04:24:18:04:18:SJ cbx_stratix 2018:04:24:18:04:18:SJ cbx_stratixii 2018:04:24:18:04:18:SJ cbx_stratixiii 2018:04:24:18:04:18:SJ cbx_stratixv 2018:04:24:18:04:18:SJ cbx_util_mgl 2018:04:24:18:04:18:SJ VERSION_END
|
||
|
|
||
|
|
||
|
-- Copyright (C) 2018 Intel Corporation. All rights reserved.
|
||
|
-- Your use of Intel Corporation's design tools, logic functions
|
||
|
-- and other software and tools, and its AMPP partner logic
|
||
|
-- functions, and any output files from any of the foregoing
|
||
|
-- (including device programming or simulation files), and any
|
||
|
-- associated documentation or information are expressly subject
|
||
|
-- to the terms and conditions of the Intel Program License
|
||
|
-- Subscription Agreement, the Intel Quartus Prime License Agreement,
|
||
|
-- the Intel FPGA IP License Agreement, or other applicable license
|
||
|
-- agreement, including, without limitation, that your use is for
|
||
|
-- the sole purpose of programming logic devices manufactured by
|
||
|
-- Intel and sold by Intel or its authorized distributors. Please
|
||
|
-- refer to the applicable agreement for further details.
|
||
|
|
||
|
|
||
|
FUNCTION cycloneive_ram_block (clk0, clk1, clr0, clr1, ena0, ena1, ena2, ena3, portaaddr[PORT_A_ADDRESS_WIDTH-1..0], portaaddrstall, portabyteenamasks[PORT_A_BYTE_ENABLE_MASK_WIDTH-1..0], portadatain[PORT_A_DATA_WIDTH-1..0], portare, portawe, portbaddr[PORT_B_ADDRESS_WIDTH-1..0], portbaddrstall, portbbyteenamasks[PORT_B_BYTE_ENABLE_MASK_WIDTH-1..0], portbdatain[PORT_B_DATA_WIDTH-1..0], portbre, portbwe)
|
||
|
WITH ( CLK0_CORE_CLOCK_ENABLE, CLK0_INPUT_CLOCK_ENABLE, CLK0_OUTPUT_CLOCK_ENABLE, CLK1_CORE_CLOCK_ENABLE, CLK1_INPUT_CLOCK_ENABLE, CLK1_OUTPUT_CLOCK_ENABLE, CONNECTIVITY_CHECKING, DATA_INTERLEAVE_OFFSET_IN_BITS, DATA_INTERLEAVE_WIDTH_IN_BITS, DONT_POWER_OPTIMIZE, INIT_FILE, INIT_FILE_LAYOUT, init_file_restructured, LOGICAL_RAM_NAME, mem_init0, mem_init1, mem_init2, mem_init3, mem_init4, MIXED_PORT_FEED_THROUGH_MODE, OPERATION_MODE, PORT_A_ADDRESS_CLEAR, PORT_A_ADDRESS_WIDTH = 1, PORT_A_BYTE_ENABLE_MASK_WIDTH = 1, PORT_A_BYTE_SIZE, PORT_A_DATA_OUT_CLEAR, PORT_A_DATA_OUT_CLOCK, PORT_A_DATA_WIDTH = 1, PORT_A_FIRST_ADDRESS, PORT_A_FIRST_BIT_NUMBER, PORT_A_LAST_ADDRESS, PORT_A_LOGICAL_RAM_DEPTH, PORT_A_LOGICAL_RAM_WIDTH, PORT_A_READ_DURING_WRITE_MODE, PORT_B_ADDRESS_CLEAR, PORT_B_ADDRESS_CLOCK, PORT_B_ADDRESS_WIDTH = 1, PORT_B_BYTE_ENABLE_CLOCK, PORT_B_BYTE_ENABLE_MASK_WIDTH = 1, PORT_B_BYTE_SIZE, PORT_B_DATA_IN_CLOCK, PORT_B_DATA_OUT_CLEAR, PORT_B_DATA_OUT_CLOCK, PORT_B_DATA_WIDTH = 1, PORT_B_FIRST_ADDRESS, PORT_B_FIRST_BIT_NUMBER, PORT_B_LAST_ADDRESS, PORT_B_LOGICAL_RAM_DEPTH, PORT_B_LOGICAL_RAM_WIDTH, PORT_B_READ_DURING_WRITE_MODE, PORT_B_READ_ENABLE_CLOCK, PORT_B_WRITE_ENABLE_CLOCK, POWER_UP_UNINITIALIZED, RAM_BLOCK_TYPE, SAFE_WRITE, WIDTH_ECCSTATUS)
|
||
|
RETURNS ( portadataout[PORT_A_DATA_WIDTH-1..0], portbdataout[PORT_B_DATA_WIDTH-1..0]);
|
||
|
|
||
|
--synthesis_resources = M9K 4
|
||
|
OPTIONS ALTERA_INTERNAL_OPTION = "OPTIMIZE_POWER_DURING_SYNTHESIS=NORMAL_COMPILATION";
|
||
|
|
||
|
SUBDESIGN altsyncram_u781
|
||
|
(
|
||
|
address_a[9..0] : input;
|
||
|
clock0 : input;
|
||
|
data_a[31..0] : input;
|
||
|
q_a[31..0] : output;
|
||
|
wren_a : input;
|
||
|
)
|
||
|
VARIABLE
|
||
|
ram_block1a0 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 0,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a1 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 1,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a2 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 2,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a3 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 3,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a4 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 4,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a5 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 5,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a6 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 6,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a7 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 7,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a8 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 8,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a9 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 9,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a10 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 10,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a11 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 11,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a12 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 12,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a13 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 13,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a14 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 14,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a15 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 15,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a16 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 16,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a17 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 17,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a18 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 18,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a19 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 19,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a20 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 20,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a21 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 21,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a22 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 22,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a23 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 23,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a24 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 24,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a25 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 25,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a26 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 26,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a27 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 27,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a28 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 28,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a29 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 29,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a30 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 30,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
ram_block1a31 : cycloneive_ram_block
|
||
|
WITH (
|
||
|
CLK0_CORE_CLOCK_ENABLE = "none",
|
||
|
CLK0_INPUT_CLOCK_ENABLE = "none",
|
||
|
CONNECTIVITY_CHECKING = "OFF",
|
||
|
INIT_FILE = "db/GECKO.ram0_RAM_15119.hdl.mif",
|
||
|
INIT_FILE_LAYOUT = "port_a",
|
||
|
LOGICAL_RAM_NAME = "ALTSYNCRAM",
|
||
|
OPERATION_MODE = "single_port",
|
||
|
PORT_A_ADDRESS_WIDTH = 10,
|
||
|
PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
|
||
|
PORT_A_BYTE_SIZE = 1,
|
||
|
PORT_A_DATA_OUT_CLEAR = "none",
|
||
|
PORT_A_DATA_OUT_CLOCK = "none",
|
||
|
PORT_A_DATA_WIDTH = 1,
|
||
|
PORT_A_FIRST_ADDRESS = 0,
|
||
|
PORT_A_FIRST_BIT_NUMBER = 31,
|
||
|
PORT_A_LAST_ADDRESS = 1023,
|
||
|
PORT_A_LOGICAL_RAM_DEPTH = 1024,
|
||
|
PORT_A_LOGICAL_RAM_WIDTH = 32,
|
||
|
PORT_A_READ_DURING_WRITE_MODE = "new_data_no_nbe_read",
|
||
|
RAM_BLOCK_TYPE = "AUTO"
|
||
|
);
|
||
|
address_a_wire[9..0] : WIRE;
|
||
|
|
||
|
BEGIN
|
||
|
ram_block1a[31..0].clk0 = clock0;
|
||
|
ram_block1a[31..0].portaaddr[] = ( address_a_wire[9..0]);
|
||
|
ram_block1a[0].portadatain[] = ( data_a[0..0]);
|
||
|
ram_block1a[1].portadatain[] = ( data_a[1..1]);
|
||
|
ram_block1a[2].portadatain[] = ( data_a[2..2]);
|
||
|
ram_block1a[3].portadatain[] = ( data_a[3..3]);
|
||
|
ram_block1a[4].portadatain[] = ( data_a[4..4]);
|
||
|
ram_block1a[5].portadatain[] = ( data_a[5..5]);
|
||
|
ram_block1a[6].portadatain[] = ( data_a[6..6]);
|
||
|
ram_block1a[7].portadatain[] = ( data_a[7..7]);
|
||
|
ram_block1a[8].portadatain[] = ( data_a[8..8]);
|
||
|
ram_block1a[9].portadatain[] = ( data_a[9..9]);
|
||
|
ram_block1a[10].portadatain[] = ( data_a[10..10]);
|
||
|
ram_block1a[11].portadatain[] = ( data_a[11..11]);
|
||
|
ram_block1a[12].portadatain[] = ( data_a[12..12]);
|
||
|
ram_block1a[13].portadatain[] = ( data_a[13..13]);
|
||
|
ram_block1a[14].portadatain[] = ( data_a[14..14]);
|
||
|
ram_block1a[15].portadatain[] = ( data_a[15..15]);
|
||
|
ram_block1a[16].portadatain[] = ( data_a[16..16]);
|
||
|
ram_block1a[17].portadatain[] = ( data_a[17..17]);
|
||
|
ram_block1a[18].portadatain[] = ( data_a[18..18]);
|
||
|
ram_block1a[19].portadatain[] = ( data_a[19..19]);
|
||
|
ram_block1a[20].portadatain[] = ( data_a[20..20]);
|
||
|
ram_block1a[21].portadatain[] = ( data_a[21..21]);
|
||
|
ram_block1a[22].portadatain[] = ( data_a[22..22]);
|
||
|
ram_block1a[23].portadatain[] = ( data_a[23..23]);
|
||
|
ram_block1a[24].portadatain[] = ( data_a[24..24]);
|
||
|
ram_block1a[25].portadatain[] = ( data_a[25..25]);
|
||
|
ram_block1a[26].portadatain[] = ( data_a[26..26]);
|
||
|
ram_block1a[27].portadatain[] = ( data_a[27..27]);
|
||
|
ram_block1a[28].portadatain[] = ( data_a[28..28]);
|
||
|
ram_block1a[29].portadatain[] = ( data_a[29..29]);
|
||
|
ram_block1a[30].portadatain[] = ( data_a[30..30]);
|
||
|
ram_block1a[31].portadatain[] = ( data_a[31..31]);
|
||
|
ram_block1a[31..0].portare = B"11111111111111111111111111111111";
|
||
|
ram_block1a[31..0].portawe = wren_a;
|
||
|
address_a_wire[] = address_a[];
|
||
|
q_a[] = ( ram_block1a[31..0].portadataout[0..0]);
|
||
|
END;
|
||
|
--VALID FILE
|